If you’re planning to call someone in the Czech Republic, here’s a quick guide to navigate the phone number system:
Country Code:
The first step is to remember the Czech Republic’s country code: +420. This precedes the actual phone number you’re trying to reach.
National Numbers:
Czech phone numbers consist of nine digits. These are national numbers, meaning you don’t need to dial any additional code within the country. They are structured as follows:
- First digit: This can be a 2 (Prague), 4 (North Bohemia), 5 (North Moravia and Silesia), or other numbers depending on the region.
- Remaining eight digits: This is the unique subscriber number assigned to the specific phone line.
Let’s say you want to call
a friend in Prague with the phone number 123 456 789. Here’s how you would dial it:
- From within the Czech Republic: Simply dial 123 456 789.
- From abroad: Dial the international calling prefix (usually 011 from the US and Canada) followed by the country code (+420) and then the local phone number (123 456 789). So, the complete number would be: 011 + 420 123 456 789.
Important Note:
- Don’t include the leading zero: When dialing from outside the Czech Republic, avoid Belize Phone Number List including the leading zero that might be present before the local phone number. Stick to the eight-digit number itself.
Additional Information
- Area Codes: The Czech KCRJ Republic previously used area codes, but these were phased out in 2002 with the introduction of the national numbering plan.
- Mobile Numbers: Mobile phone numbers in the Czech Republic typically start with the digit 6 or 7, followed by eight digits. They are dialed the same way as landline numbers.
With this knowledge, you should be all set to make calls to
Calling the Czech Republic?